====== Node Development Hardware ======
To create basic bus nodes small development boards were designed.
They are small PCBs with cheap SMD components which can be easily integrated into own projects.

Components:
   * Controller: ATMega164, ATMega324 or ATMega644
   * 18MHz xtal
   * RFM12 module or RS485 transceiver
   * 2.5V voltage reference for ADC
   * RS485 version: 5V, 200mA switching regulator (LM2574, LM2594, LM2674 depending on availability and cost)
   * RF version: 5V linear regulator
   * 2.54mm connections for integration into own projects
   * RS485 version: One RJ45 connector
   * RF version: Pads for a SMA antenna connector
   * ISP connector
   * one current output for motors or lights

===== RF Version=====
{{:uberbus:dev-rf-ecke-ant.jpg?400|}}

Size of the PCBs: 49mm x 33mm

===== Kits =====
You can get a kit for the RF or RS485 development boards.
^Version^Price^
| RF    | 15 Eur |
| RS485 | 17 Eur |

=== colorcodes of smd parts - RS485 kit ===

^  Wert  ^Bauform^ Farbcode ^
| 100nF   | 0805  | rot       |
| 22pf    | 0805  | blau      |
| 330ohm  | 0805  | grün      |
| 220Kohm | 0805  | rosa      |
| 1Kohm   | 0805  | gelb      |
|  ?      | 0603  | braun     |


===== Build instructions =====
TODO
======= Bridge Hardware ======
Currently only the moodlamp can act as a bridge to a computer.